629
8
8-1. Specifications
Vehicle specifications
LX570_450d_OM_OM60R63E_(GE)
Oil viscosity (5W-30 is explained here as an example):
• The 5W in 5W-30 indicates the characteristic of the oil which allows cold
startability. Oils with a lower value before the W allow for easier starting of
the engine in cold weather.
• The 30 in 5W-30 indicates the viscosity characteristic of the oil when the
oil is at high temperature. An oil with a higher viscosity (one with a higher
value) may be better suited if the vehicle is operated at high speeds, or
under extreme load conditions.
Diesel engine (except for EURO IV models*
1
)
*
1
: EURO IV is an emission standard. If it is not clear that your vehicle meets relevant
standards, contact your Lexus dealer.
*
2
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level
on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following
grade and viscosity.
Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0
Recommended viscosity (SAE):
SAE 5W-30 is the best choice for
good fuel economy and good start-
ing in cold weather.
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
5W-30 engine oil is recommended.
Oil capacity
(Drain and refill — reference*
2
)
With filter
Without filter
9.2 L (9.7 qt., 8.1 Imp. qt.)
8.2 L (8.7 qt., 7.2 Imp.qt.)
Temperature range anticipated
before next oil change
Preferred
To Next Page
Loading...
