Lexus LX570 - Page 306

306
2. SETUP
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
■ UPDATING CONTACTS FROM
PHONE
1 Select “Update Now”.
 Contacts are transferred automatically.
2 Check that a confirmation screen is dis-
played when the operation is complete.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
®
phone.
 If another Bluetooth
®
device is connected
when transferring contact data, depending
on the phone, the connected Bluetooth
®
device may need to be disconnected.
 Depending on the type of Bluetooth
®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
When the contact is not registered
1 Select “Transfer Contacts from
Phone”.
2 Transfer the contact data to the system
using a Bluetooth
®
phone.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
®
phone.
 To cancel this function, select “Cancel”.
3 Check that a confirmation screen is dis-
played when the operation is complete.
TRANSFER CONTACTS FROM
PHONE