Lexus LX570 - Page 307

307
2. SETUP
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
PHONE
7
When the contact is registered
1 Select “Transfer Contacts from
Phone”.
2 Select “Replace Contacts” or “Add
Contact”.
“Replace Contacts”: Select to transfer the
contact from the connected cellular phone
and replace the current one.
“Add Contact”: Select to transfer the de-
sired contact data from the connected cel-
lular phone to add to the current one.
3 Transfer the contact data to the system
using a Bluetooth
®
phone.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
®
phone.
 To cancel this function, select “Cancel”.
4 Check that a confirmation screen is dis-
played when the operation is complete.
■ UPDATING THE CONTACTS
(FROM THE “Call History”
SCREEN)
1 Display the phone top screen.
(→P.287)
2 Select the “Call History” tab and select
a contact not yet registered in the con-
tact list.
3 Select “Update Contact”.
4 Select the desired contact.
5 Select a phone type for the phone num-
ber.