Lexus LX570 - Page 60

60
3. OTHER SETTINGS
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
1 Display the “General Settings” screen.
(→P.57)
2 Select “Customize Images”.
3 Select the items to be set.
■ TRANSFERRING IMAGES
1 Press the lid.
2 Open the cover and connect a device.
 Turn on the power of the USB memory if it
is not turned on.
3 Select “Copy from USB”.
CUSTOMIZING THE STARTUP
AND SCREEN OFF IMAGES
An image can be copied from a USB
memory and used as the startup and
screen off Images.
The built-in movie can also be set as the
startup image.
When the engine switch is turned to
ACCESSORY or IGNITION ON
mode, the initial screen (startup image)
will be displayed. (→P.30)
When “Screen Off” on the “Display”
screen is selected, the screen is turned
off and the desired screen off image that
is set is displayed. (To turn the screen off:
→P.37)
No. Function Page
Select to copy images from
a USB memory.
60
Select to delete images. 62
Select to set an image as the
startup or screen off image.
61