372
5-7. Connecting Bluetooth
®
RC350/RCF_U (OM24636U)
When the portable audio player is in standby for a connection, it will be automat-
ically connected whenever the engine switch is in either ACCESSORY or IGNI-
TION ON mode.
Operate the portable player and connect it to the Bluetooth
®
audio system.
Go to “Bluetooth
* Setup”: “Setup” “Bluetooth*”
Select the device to connect.
Select “Connect All” or “Connect as an Audio player”.
If the desired Bluetooth
®
device is not displayed, register the device.
(P. 370)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Connecting a Bluetooth
®
audio player
There are 2 portable audio player connection settings available: connecting
from the vehicle and connecting from the portable player.
Connecting method is set to “Vehicle”
Connecting method is set to “Device”
1
2
3
To Next Page
Loading...
