AIR CONDITIONING
148
2001 MY RX300_U (OM48431U)
(b) Windshield defogging and defrosting
20R008a
To remove interior fog on the windshield –
Push the “FRONT WINDSHIELD” button.
To remove frost or exterior fog on the windshield –
1. Turn the “TEMP” knob at the maximum temperature.
2. Push the “FRONT WINDSHIELD” button.
3. Turn the “FAN SPEED CONTROL” button to obtain a
maximum air flow.
4. Leave the air conditioning on–off button off.
When the “FRONT WINDSHIELD” button is pushed, air flows
mainly from the windshield vents and the OUTSIDE AIR mode
is automatically set. This setting clears the front view more
quickly.
If you want to return the setting to RECIRCULATED AIR mode,
push the air intake control button once again.
Pushing the “FRONT WINDSHIELD” button turns on the
defroster–linked air conditioning. This is to clean up the front
view more quickly.
Pushing the “FRONT WINDSHIELD” button once again
returns the air flow mode to the last one used.
CAUTION
Do not use the “FRONT WINDSHIELD” button during
cooled air operation in extremely humid weather. The
difference between the temperature of the outside air
and that of the windshield could cause the outer surface
of the windshield to fog up blocking your vision.
To Next Page
Loading...
