Lexus RX300 2001 - Cassette Tape Player Operation; Playing a Cassette Tape

AUDIO
161
2001 MY RX300_U (OM48431U)
Cassette tape player operation
(a) Playing a cassette tape
20R289
When you insert a cassette tape, the exposed tape should
be to the right.
The player will automatically start when you insert a cassette
tape. At this time, “TAPE” appears on the display.
If a metal or chrome equivalent cassette tape is put in the
cassette player, the player will automatically adapt to it and
“METAL” appears on the display.
To stop or eject the cassette tape, push the “EJECT” button.
Auto–reverse feature: After the cassette player reaches the
end of a tape, it automatically reverses and begins to play the
other side, regardless of whether the cassette was playing or
fast forwarding.
20R022a
If a cassette is already in the slot, push the “TAPE” button.
Dolby Noise Reduction* feature: If you are listening to a
tape that was recorded with Dolby* B or C Noise Reduction,
push the button by the double–D symbol until the appropriate
symbol appears on the display.
The Dolby B NR mode reduces tape noise by about 10 dB. The
Dolby C NR mode reduces tape noise by another 10 dB or
about 20 dB total. For best sound reproduction, select the
same NR mode that was used to record the tape.
To play a tape recorded without Dolby NR, push the button until
the symbol disappears from the display.
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation. “DOLBY” and the double–D
symbol
are trademarks of Dolby Laboratories Licensing
Corporation.