KEYS AND DOORS
17
2001 MY RX300_U (OM48431U)
Replacing the battery
When you replace the battery, prepare a lithium battery
CR1616 and a special screwdriver.
CAUTION
Special care should be taken that small children do not
swallow the removed battery or components.
NOTICE
When replacing the battery, be careful not lose the
components, screws and O–ring.
11L028–1
1. Remove the screw, and then the cover while pushing it in the
arrow direction.
11R056
2. Remove the module from the key frame.
11R057
3. Remove the lid of the module.
4. Take out the discharged battery and put a new battery with
the positive side up.