5 300781309_002_C0 - 01/2019 - © Leybold
Introduction
0 Introduction
This manual is to be used as a quick check of the operation and display of the
Residual Gas Analyzer.
Refer to the instruction manual located on the CD for detailed information on proper
operation, precautions and safe use of the unit.
0.1 Before use
Confirm that the PC has a LAN port. To use a USB/LAN converter, install a driver.
The sensor unit is a 24 V d.c. drive. Prepare the AC/DC adaptor or 24 V a.c./d.c.
power supply (more than 50 W).
Confirm the model to be used. The model can be found on the sensor connector
panel side of the sensor unit and flange.
To Next Page
Loading...
Need help?
General
