3
kobalttools.com
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday.
KNOW THE TOOL
To operate this tool, carefully read this manual and all labels afxed to the router and router table
before using them. Keep this manual available for future reference.
IMPORTANT
This tool should only be serviced by a qualied service technician.
READ ALL INSTRUCTIONS THOROUGHLY
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Volts
A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Amp
Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hertz
W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Watts
min . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minutes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alternating Current
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct Current
n
o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No-load Speed
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class II Construction
.../min . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revolutions or Strokes Per Minute
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates danger, warning, caution.
It means attention! Your safety is involved.