LFA RTP 9 - Page 68

68
29. Insert an Upper Punch through the top of the Turret.
30. Place the Upper Punch's head on the Upper Tracking.
30.1 Note: Be sure that the Upper Punch's head is above the Upper Tracking to
prevent damage.
31. Rotate the Handle until the next Upper Punch can be inserted.
32. Repeat steps 29-31 until all the Upper Punches are inserted into the Turret.
33. Resecure the Upper Tracking Key with an Allen key.
33.1 Note: Manually turn the RTP 9®'s Turret for a couple of full rotations to ensure that the
Upper Punches are situated correctly.