67
24. Insert a Lower Punch up through the Lower Punch Insertion Disc's hole and into the Die's
Bore.
25. Place the Lower Punch's head on the Lower Tracking.
26. Rotate the Handle until the next Lower Punch can be inserted.
27. Repeat steps 24-26 until all the Lower Punches are inserted into the Turret.
28. Reinsert the Lower Punch Insertion Disc with the beveled side facing up.
28.1 Note: Manually turn the RTP 9®'s Turret for a couple of rotations to ensure that the
Lower Punches are situated correctly.
To Next Page
Loading...