6. When the wall clock detects the atomic clock signal, the signal strength indicator
will be animated.
5. After 3 min sensor pairing time, the wall clock will automatically receive atomic
clock signal, the tower icon will be flashing.
3. Keep the outdoor sensor 5-10 feet from the wall clock.
4. When the RF connection is established, the temperature readings will appear on
the station.
6
7. Put the wall clock away from interference, such as electronic devices
(TV, computer, microwave, radio, etc.)
8. When the wall clock signal is received successfully , the time and date
will be updated. The Atomic Time tower icon will be solid.
To Next Page
Loading...
