How to fix LG 15LS766A0UA.AUS remote control not working?
If your LG LED TV remote isn't working, first ensure that nothing is blocking the receiver on the TV, such as tape. Then, check for any obstacles between the remote and the TV. Finally, try replacing the remote batteries with new ones.
Why does my LG 15LS766A0UA.AUS LED TV turn off suddenly?
Your LG LED TV might be turning off suddenly due to a few reasons. The power supply could be interrupted, so check the power control settings. Also, the auto-off function might be activated in the time-related settings. Finally, if there's no signal while the TV is on, it will automatically turn off after 15 minutes of inactivity.
What to do if LG LED TV remote control is not working?
If you cannot control your LG LED TV with the remote, check these things: ensure nothing like tape is over the receiver; make sure there are no obstacles between the remote and the TV; and try replacing the batteries in the remote with new ones.
What to do if my LG 15LS766A0UA.AUS LED TV has no image and sound?
If your LG LED TV is showing no image and producing no sound, first, check if the TV is turned on. Next, ensure the power cord is properly connected to a working wall outlet. You can also test the wall outlet by connecting other products to see if it's functioning correctly.
What to do if my LG LED TV has no picture and sound?
If your LG LED TV has no image and no sound, start by verifying that the TV is powered on. Next, check that the power cord is properly connected to the wall outlet. To ensure the wall outlet is working, connect another device to it.
Why does my LG 15LS766A0UA.AUS LED TV keep turning off by itself?
If your LG LED TV is turning off unexpectedly, examine the power control settings to ensure the power supply isn't being interrupted. Also, check if the auto-off function is enabled in the time settings. Note that the TV will automatically turn off after 15 minutes of inactivity if there is no signal.
What to do if my LG LED TV connecting to PC (HDMI) has no signal?
If your LG LED TV isn't detecting a signal when connected to your PC via HDMI, try these steps: turn the TV off and then on again using the remote control; try reconnecting the HDMI cable; and restart your PC while the TV is powered on.
What to do if LG 15LS766A0UA.AUS is not detecting HDMI signal from PC?
If your LG LED TV isn't detecting a signal when connected to a PC via HDMI, try turning the TV off and then on again using the remote control. If that doesn't work, try reconnecting the HDMI cable. As a final step, restart your PC while the TV is powered on.
Why is my LG LED TV making strange noises?
A cracking noise from your LG LED TV during operation or when turning it off is typically due to plastic thermal contraction caused by temperature and humidity changes. Additionally, a low-level noise may be produced by the high-speed switching circuit that supplies power to the TV.
Why does my LG 15LS766A0UA.AUS LED TV make cracking noises?
The cracking noise you hear when watching or turning off your LG LED TV is due to plastic thermal contraction caused by temperature and humidity changes; this is normal for products requiring thermal deformation. A low-level noise may also come from a high-speed switching circuit supplying current, but this doesn't affect the TV's performance or reliability.
General| Display Type | LED |
|---|---|
| Aspect Ratio | 16:9 |
| Refresh Rate | 60Hz |
| Screen Size | 15 inches |
| Inputs | HDMI, USB |
| Dimensions (W x H x D) | 14.2" x 9.2" x 1.4" (without stand), 14.2" x 10.2" x 5.7" (with stand) |
To Next Page
