Why won't my LG 15LU766A remote work?
If you're having trouble controlling your LG LED TV with the remote, there might be a simple fix. First, check to ensure that nothing is blocking the receiver on the TV, like tape or other obstructions. Also, make sure there are no obstacles between you and the TV that could be interfering with the signal. Finally, try replacing the batteries in the remote with fresh ones.
Why is my LG 15LU766A not displaying an image or sound?
If your LG LED TV isn't showing an image and there's no sound, first ensure the TV is powered on. Next, verify that the power cord is securely connected to a working wall outlet. To check the outlet, plug in another device to see if it functions correctly.
What to do if my LG 15LU766A LED TV turns off suddenly?
If your LG LED TV is turning off unexpectedly, it could be due to a few reasons. Check the power control settings to ensure the power supply isn't being interrupted. Also, verify whether the auto-off function is enabled in the settings. If the TV doesn't detect a signal while it's on, it will automatically shut down after 15 minutes of inactivity.
Why is my LG LED TV showing no image and producing no sound?
If your LG LED TV isn't displaying an image and there's no sound, start by checking if the TV is powered on. Next, make sure the power cord is securely connected to a working wall outlet. To confirm the outlet is functioning correctly, try plugging in another device.
What to do if LG 15LU766A remote control is not working?
If your LG LED TV remote isn't working, begin by checking the remote control sensor on the TV and try again. Ensure there are no obstructions between the remote and the TV. Also, verify that the batteries in the remote are working and correctly installed ( to , to ).
Why does my LG 15LU766A turn off suddenly?
If your LG LED TV is turning off unexpectedly, check the power control settings to ensure the power supply isn't being interrupted. Also, verify if the auto-off function is enabled in the time-related settings. Note that the TV will automatically turn off after 15 minutes of inactivity if there is no signal.
What to do if no signal is detected when connecting my PC (HDMI) to LG 15LU766A LED TV?
If you're not getting a signal when connecting your PC to your LG LED TV via HDMI, try these steps: First, turn the TV off and then on again using the remote control. If that doesn't work, try disconnecting and then reconnecting the HDMI cable. As a final step, restart your PC while the TV is turned on.
What causes abnormal display on LG 15LU766A?
Several factors can cause abnormal display on your LG LED TV. If the TV feels cold, a slight flicker upon turning it on is normal. Avoid touching the LCD screen or applying prolonged finger pressure, as this may cause temporary distortion. When cleaning, wring out excess water from the cloth and avoid spraying water directly onto the screen; instead, lightly dampen a cloth. Displaying a still image for a long time may also cause image sticking, so avoid doing that.
What causes generated sound from LG 15LU766A LED TV?
The sounds you hear from your LG LED TV can be normal. A cracking noise when watching or turning off the TV is often due to plastic thermal contraction caused by temperature and humidity changes. Also, a low-level noise may come from the high-speed switching circuit that supplies power to operate the TV. This doesn't affect the TV's performance or reliability.
How to fix no signal when connecting PC (HDMI) to LG 15LU766A?
If your LG LED TV isn't detecting a signal when connected to a PC via HDMI, try turning the TV off and then on again using the remote control (depending on the model). If that doesn't work, try reconnecting the HDMI cable. As a final step, restart your PC while the TV is powered on.
General| Display Type | LED |
|---|---|
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Built-in Wi-Fi | No |
| Smart TV | No |
| Energy Rating | A |
| Screen Size | 15 inches |
To Next Page
