- 6 -
1. Application range
This specification is applied to the 20”/ 23” Wide LCD TV used
LP69A chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Power : Standard input voltage (100-240V~, 50/60Hz)
*Standard Voltage of each products is marked by models.
(2) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(3) The receiver must be operated for about 20 minutes prior
to the adjustment.
3. Test method
3.1 Performance : LGE TV test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. General Specification(TV)
No Item Specification Remark
1 Video input applicable system PAL-D/K, B/G, I, SECAM L, NTSC, NTSC. 4.43 (ZA)
2 Receivable Broadcasting System PAL/SECAM BG (ZA/TA)
PAL/SECAM DK EU/Non-EU
PAL I/I (PAL Market)
SECAM L/L’
3 RF Input Channel VHF : E2 ~ E12 PAL
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21~ S41
L/L’ : B, C, D FRANCE
4 Input Voltage 100-240V~, 50/60Hz
5 Market EU
6 Tuning System FVS 100 program PAL, 200 PR.(Option)
FS NTSC
7 Operating Environment Temp : 0 ~ 40 deg
Humidity : 10~90 %RH
8 Storage Environment Temp : -20 ~ 50 deg
Humidity : 10~90 %RH
9 Display LCD Module
To Next Page
Loading...
