LG 22MP58VQ User Manual

28
ENG
ENGLISH
TROUBLESHOOTING
y
Check
Control Panel ► Display ► Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the recommend resolution.
y
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
y
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
CAUTION
The screen is flickering.
Did you select the recommended
resolution?
y
If the selected resolution is HDMI
1080i
60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P
.
Display image is incorrect
The screen color is mono or
abnormal.
y
Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
y
Make sure the video card is properly inserted in the slot.
y
Set the color setting higher than 24 bits (true color) at
Control Panel
► Settings
.
The screen blinks.
y
Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
y
Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
y
Make sure to check if the video card supports Plug&Play function.
22MP58HQ
22MP58VQ
24MP58HQ
27MP58HQ
27MP58VQ24MP58VQ

LG 22MP58VQ Specifications

General

3D	No
DDC/CI	Yes
Screen shape	Flat
Display diagonal	21.5 \
Display technology	LED
Native aspect ratio	16:9
Peak luminance ratio	88 %
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Sustainability certificates	EPEAT Gold, ENERGY STAR
Annual energy consumption	31 kWh
Power consumption (standby)	0.3 W
Power consumption (typical)	24 W
On/off switch	-
Mercury content	0 mg
Product color	Black

Weight and Dimensions

Depth (with stand)	186.8 mm
Height (with stand)	395.3 mm
Depth (without stand)	86.8 mm
Width (without stand)	510.1 mm
Height (without stand)	308.4 mm