To Next Page
A
aperezAug 7, 2025
What to do if my LG 22MP58A screen is blinking?
- JJonathan WattsAug 8, 2025
If your LG Monitor screen is blinking, it might be set to interlace mode. Change it to the recommended resolution to resolve this issue.
What to do if my LG 22MP58A screen is blinking?
If your LG Monitor screen is blinking, it might be set to interlace mode. Change it to the recommended resolution to resolve this issue.
Why is my LG Monitor screen flickering?
If your LG Monitor screen is flickering and the selected resolution is HDMI 1080i 60/50 Hz, change the resolution to the recommended resolution 1080P.
How to fix an LG 22MP58A Monitor when no image appears?
First, check if the power cord of your LG Monitor is properly connected to the power outlet. Then, ensure that you press the Power button to turn the monitor on. If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard. Also, verify that your PC is turned on. If the signal from the PC (video card) is out of the horizontal or vertical frequency range of the display, see the 'Specifications' section of this manual and configure your display again. When the monitor is on 'No-Signal' in 5 minutes, the monitor goes to DPM mode.
What to do if the display image on my LG Monitor is incorrect?
To correct the display image on your LG Monitor, first, use the Auto Configuration function and select 'Yes' to automatically adjust the image to the ideal setting. If the issue persists, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. Also, ensure that the color setting is higher than 24 bits (true color).
How to fix 'Unrecognized monitor' message on my LG 22MP58A Monitor?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, be sure to install the display driver from the display driver CD (or diskette) that comes with your display. You can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function.
Why is the screen color on my LG 22MP58A mono or abnormal?
If the screen color on your LG Monitor is mono or abnormal, check if the signal cable is properly connected and use a screwdriver to fasten it if necessary. Also, make sure the video card is properly inserted in the slot. Finally, set the color setting higher than 24 bits (true color) at Control Panel ? Settings.
How to unlock OSD controls on my LG Monitor?
If you can't control some functions in the OSD (On-Screen Display) of your LG Monitor, you can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.
General| Screen Size | 21.5 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Response Time | 5ms (GTG) |
| Refresh Rate | 60 Hz |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Weight | 3.2 kg |
| Connectivity | HDMI |
