ENGLISH
13
ASSEMBLING AND PREPARING
CAUTION
Do not carry the TV upside-down by
holding the stand body (or stand base)
as this may cause it to fall off, resulting in
damage or injury.
The illustration shows a general example
of installation and may look different from
the actual product.
Mounting on a table
1 Lift and tilt the TV into its upright position
on a table.Leave a 10 cm (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the AC-DC Adapter and Power
Cord to a wall outlet.
DC-IN
(19V )
AC-DC Adapter
Power Cord
CAUTION
Do not place the TV near or on sources
of heat, as this may result in re or other
damage.
Please be sure to connect the TV to the AC-
DC power adapter before connecting the
TV’s power plug to a wall power outlet.