EasyManuals Logo

LG 22MT45D User Manual

LG 22MT45D
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
ENGLISH
16
ASSEMBLING AND PREPARING
CAUTION
Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
Screw length from outer surface of back
cover should be under 8mm.
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8mm
NOTE
Use the screws that are listed on the
VESA standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You
can obtain additional accessories from
your local dealer.
The length of screws may differ
depending on the wall mount. Be sure to
use the proper length.
For more information, refer to the
instructions supplied with the wall mount.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 22MT45D and is the answer not in the manual?

LG 22MT45D Specifications

General IconGeneral
3DNo
HD type-
Pixel pitch0.24795 x 0.24795 mm
Aspect ratio4:3, 16:9
Composite syncYes
Display surfaceMatt
Display diagonal21.5 \
Native aspect ratio16:9
Viewing angle, vertical160 °
Contrast ratio (dynamic)5000000:1
Display number of colors16.78 million colors
Viewing angle, horizontal170 °
Display brightness (typical)200 cd/m²
Digital signal format systemDVB-C, DVB-T
USB Type-A downstream ports quantity0
RMS rated power10 W
Number of speakers2
Product colorBlack
Tilt angle range-5 - 20 °
Panel mounting interface100 x 100 mm
AC input voltage100 - 240 V
Power consumption (max)30 W
Power consumption (off)0.4 W
Power consumption (standby)- W
Power consumption (PowerSave)1 W
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)166.4 mm
Height (with stand)364.3 mm
Weight (with stand)3000 g
Depth (without stand)56 mm
Width (without stand)507.6 mm
Height (without stand)314.7 mm
Weight (without stand)2800 g

Related product manuals