To Next Page

To Previous Page

ENGLISH

Wall Mount Holder

To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.

Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.

The VESA dimensions of the wall mount by model are as follows.

Model

VESA Dimensions

(AxB) (mm)

Standard Dimensions

Length (Maximum)

(mm)

Quantity

22XE1J

100x100 M4 8.5 4

VESA Dimensions

(AxB) (inches)

Standard Dimensions

Length (Maximum)

(inches)

Quantity

3.9x3.9 M4 0.3 4

CAUTION

• Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.

• If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.

• Damage to the monitor by tightening the screws too tightly may void your warranty.

• Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse

of inappropriate components is not covered by the warranty of this product.

NOTE

• Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.

• For more information on installation, please refer to the user manual for the wall mount.

LG 22XE1J User Manual

Other manuals for LG 22XE1J