What to do if my LG 24EN43VS Monitor says 'OUT OF RANGE'?
If your LG Monitor displays an "OUT OF RANGE" message, it means the signal from your PC's video card is outside the monitor's supported horizontal or vertical frequency range. Consult the 'Specifications' section of the manual to determine supported ranges and reconfigure your display settings accordingly.
Why does my LG Monitor say 'No Signal'?
If your LG Monitor displays a 'NO SIGNAL' message, it might be in DPM (Display Power Management) mode. This happens if the monitor doesn't receive a signal for 5 minutes.
Why is my LG Monitor screen flickering?
If the selected resolution is HDMI 1080i 60/50 Hz, the screen of your LG Monitor may be flickering. Change the resolution to the recommended resolution 1080P.
What to do if my LG 24EN43VS screen blinks?
Check if your LG Monitor's screen is set to interlace mode. If it is, change it to the recommended resolution.
How to fix 'Unrecognized monitor' message on my LG Monitor?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG monitor, it indicates that the display driver may not be installed. Install the driver from the CD or diskette that came with your monitor, or download it from the LG website (http://www.lg.com). Also, ensure that your video card supports the Plug&Play function.
How to unlock OSD on my LG Monitor?
If you see “OSD LOCKED” when you push the MENU button on your LG Monitor, you can unlock the OSD controls by pushing the MENU button for several seconds until the message “OSD UNLOCKED” appears.
How to troubleshoot no image on my LG Monitor?
First, ensure the power cord is properly connected to the power outlet. If the power indicator light isn't on, press the Power button. If the power is on but the indicator is red, adjust the brightness and contrast. If the indicator is flickering, the display might be in power saving mode; try moving the mouse or pressing a key on the keyboard.
How to fix incorrect display image on my LG Monitor?
To correct the display image on your LG Monitor, press the AUTO button to automatically adjust the image to the ideal setting. If horizontal noise appears or characters aren't clear, press the AUTO button. Also, check Control Panel ? Display ? Settings to adjust the display to the recommended resolution, and set the color setting higher than 24 bits (true color).
What to do if the screen color on my LG Monitor is mono or abnormal?
Ensure the signal cable is properly connected to your LG Monitor, and use a screwdriver to tighten it if necessary. Also, make sure the video card is properly inserted in its slot. Set the color setting higher than 24 bits (true color) at Control Panel ? Settings.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5ms (GTG) |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | 72% NTSC |
| Connectivity | HDMI |
To Next Page
