What to do if my LG Monitor shows a 'NO SIGNAL' message?
If your LG monitor displays a 'NO SIGNAL' message, it means the signal cable between your PC and the monitor might be missing or disconnected. Check the cable and reconnect it securely. If the monitor is in DPM mode with the power LED off, press the DC button twice to wake up the screen.
How to fix a flickering screen on my LG Monitor?
If your LG monitor screen is flickering, and you've selected HDMI 1080i 60/50 Hz resolution, this could be the cause. Change the resolution to the recommended 1080P to resolve the flickering.
Why is there no image on my LG 25BL56WY Monitor?
If no image appears on your LG monitor, first ensure the power cord is properly connected to the power outlet. Next, check if the power indicator light is on; if not, press the Power button. If you see an 'Out of Range' message, refer to the 'Specifications' section of the manual to configure your display settings. If you see a 'NO SIGNAL' message, check and reconnect the signal cable between the PC and the monitor.
What to do if no image appears on my LG 25BL56WY?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the power outlet and that you've pressed the Power button. Also, check the signal cable for secure connection; if it's disconnected, reconnect it. If the monitor is in DPM mode with the power LED off, press the DC button twice to wake the screen. Finally, this issue could be caused by the signal from the PC (video card) being out of the horizontal or vertical frequency range of the display. In this case, see the 'Specifications' section of this manual and configure your display again. Also, ensure that OSD controls are unlocked by entering the OSD lock menu and changing items to 'off'.
Why is the display image incorrect on my LG 25BL56WY Monitor?
If the display image on your LG monitor is incorrect, showing mono or abnormal colors, check if the signal cable is properly connected, and tighten it with a screwdriver if needed. Also, ensure that your video card is correctly inserted. Finally, verify that your color settings are set higher than 24 bits (true color) in Control Panel settings.
What to do if my LG 25BL56WY Monitor screen blinks?
If your LG monitor screen is blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
How do I unlock the OSD controls on my LG Monitor?
To unlock the OSD controls on your LG monitor, enter the OSD lock menu and change the settings to 'off'.
General| Screen Size | 25 inches |
|---|---|
| Resolution | 2560 x 1080 |
| Panel Type | IPS |
| Aspect Ratio | 21:9 |
| Brightness | 250 cd/m² |
| Response Time | 5 ms |
| Refresh Rate | 75 Hz |
| Contrast Ratio | 1000:1 |
| Color Gamut | sRGB 99% |
| VESA Mount | 100 x 100 mm |
| Connectivity | HDMI, DisplayPort |
| Viewing Angle | 178° (H) / 178° (V) |
To Next Page
