19
ENG
ENGLISH
CUSTOMIZING SETTINGS
y
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y
SAVING DATA(W/h)
584 mm
(23 inch)
686 mm
(27 inch)
SUPER SAVING 6 W/h 8 W/h
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
y
LG calculated these values by using “broadcast video signal”
(including broadcast video: IEC 62087)
y
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
NOTE
SUPER ENERGY SAVING
1
Press FUNC. button on the bottom of the Monitor set to
display the FUNC. OSD.
2
Select SUPER ENERGY SAVING by pressing the ►
button.
3
Enter to SUPER ENERGY SAVING by pressing the ▼
button.
4
Set the options by pressing the ◄ or ► or ▼buttons.
5
Select Exit to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow
( ) button.
Each option is explained below.
SUPER ENERGY SAVING Description
On
Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function
Off Disables SUPER ENERGY SAVING.
Reset Resets the values of total energy consumption reduction and CO2 emission reduction
estimates.
To Next Page
Loading...
Need help?
General
