9
ENG
ENGLISH
Setting up the Monitor set
Attaching the Stand Base
y
To protect the screen from scratches, cover the
surface with a soft cloth.
y
To avoid injury to the fingers and foot when
Assembly Stand Body and Base, should hold Base
when assembly stand body and base.
CAUTION
1
2
3
4
5
y
Illustrations in this document represent typical
procedures, so they may look different from the actual
product.
y
Do not carry the monitor upside down by just holding
the stand base. This may cause the monitor to fall off
the stand and could result in personal injury.
y
When lifting or moving the monitor, do not touch the
monitor screen. The force applied to the monitor screen
may cause damage to it.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
y
Applying excessive force when tightening screws
may cause damage to the monitor. Damage caused
in this way will not be covered by the product
warranty.
CAUTION
y
You can disassemble the stand in the reverse
order of the assembly.
NOTE
WARNING
Stand Body
Stand Base
Screw Cover
To Next Page
Loading...
Need help?
General
