20
ENGLISH
[General]
• [Language]: Sets the menu screen to the desired language.
• [SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
- [High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
- [Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
- [Off]: Disables the feature.
• [Automatic Standby]: If there is no operation on the monitor for a certain period of time, the monitor will
automatically switch to standby mode.
• [Auto Reverse]
- [On]: Automatically rotates the screen 180 degrees by detecting when the monitor is upside down.
- [Off]: Disables the [Auto Reverse] feature.
• [DisplayPort Version]: Set DisplayPort Version to the same version as the connected external device. ([1.4]
and [1.2])
To use the HDR function, set to [1.4].
• [Buzzer]: This feature lets you set the sound generated from Buzzer when your monitor powers on.
• [OSD Lock]: This feature disables the configuration and adjustment of menus.
All features are disabled except [Brightness], [Contrast] and [Volume] on [Quick Settings], menus of on
[Input], and [OSD Lock] and [Information] of [General].
• [Deep Sleep Mode]: When [Deep Sleep Mode] is [On], power consumption is minimized while the monitor is
in standby mode.
- [On]: Enables [Deep Sleep Mode].
- [Off]: Disables [Deep Sleep Mode].
• [Information]: The following display information will be shown; [Total Power On Time], [Resolution].
• [Reset to Initial Settings]: Returns to the default settings.
NOTE
• [SMART ENERGY SAVING]
- The value of energy saving data may differ depending on panel and panel suppliers.
- If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher
or lower depend on source.
• [Auto Reverse]
- When rotating 180 degrees, [Response Time] and DAS Mode do not work.
To Next Page
Loading...
Need help?
General
