What to do if the LG 27MT93V LED TV screen is divided when I change the channel?
If the screen on your LG LED TV is divided into left/right or top/bottom when you change the channel, it means the channel supports the 3D imaging mode. Select the 3D imaging type displayed on the screen by pressing the 3D button on the remote control.
How to disable 3D imaging mode on LG LED TV?
If you see an overlapped image when switching from 2D to 3D on your LG LED TV, disable the 3D imaging mode with the 3D button on the remote control.
Why can I see a swirling oil-like pattern on my LG 27MT93V when it's off?
The swirling, oil-like pattern you see on your LG LED TV when it's off is due to the interference of external light in the air layer between the LCD/LED surface and 3D filter. The pattern becomes almost invisible when you turn the power on again.
Guide for initial TV setup, including language selection and basic preference customization.
Explanation of buttons and functions for both standard and Magic Remote Controls.
Recommendations on viewing time, age appropriateness, health warnings, and proper 3D glasses use.
Solutions for common TV issues including remote control, display, sound, and auto-off problems.
Troubleshooting steps for problems encountered while using the TV's 3D viewing mode.
Information on video formats and modes supported for automatic and manual 3D viewing.
General| Screen Size | 27 inches |
|---|---|
| Display Type | LED |
| Resolution | 1920 x 1080 (Full HD) |
| Smart TV | Yes |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| Refresh Rate | 60Hz |
| Response Time | 5ms |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Sound Output | 10W (5W x 2) |
| Viewing Angle | 178° |
| Input Ports | Component, Composite |
To Next Page
