LG 27UD88-W - Advanced Picture Settings; Game Adjustments; Color Adjustments

24
ENGLISH
Game Adjust Response Time Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Middle. For a fast-moving
picture, it is recommended that you use high.
Setting to High may cause image sticking.
High Sets the response time to High.
Middle Sets the response time to Middle.
Low Sets the response time to Low.
Off Does not use the response time improvement feature.
FreeSync Provides seamless and natural images by synchronizing the vertical frequency of the
input signal with that of the output signal.
CAUTION
y
Supported Interface: DisplayPort.
y
Supported Graphic Card : A graphic card that supports AMD’s FreeSync
is necessary.
y
Supported Version : Make sure to update the graphic card to the latest
driver.
y
For more information and requirement, refer to AMD website at http://
www.amd.com/FreeSync
On FreeSync function on.
Off FreeSync function off.
Black Stabilizer You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You
can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the
dynamic contrast on the screen.
Color Adjust Gamma The higher the gamma value, the darker the image becomes. Likewise, the lower the
gamma value, the lighter the image becomes. If you do not need to adjust the gamma
settings, select Off.
Color Temp Manual Adjusts the color temperature in 500K increments. (Note
that 9300K is supported instead of 9500K.)
Custom The user can adjust it to red, green, or blue by
customization
Red You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Six Color Meets the user requirements for colors through adjusting the color and saturation of
the six colors(Red_Hue, Red_Saturation, Green_Hue, Green_Saturation, Blue_Hue,
Blue_Saturation, Cyan_Hue, Cyan_Saturation, Magenta_Hue, Magenta_Saturation,
Yellow_Hue, Yellow_Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the value, less
saturated and bright the colors become. The higher the value, the more saturated and
dark the colors become.
Reset Returns the color settings to the default settings.
Aspect Marker This function is to express aspect ratio for screen .
Off Disables Aspect Marker
17:9 Enables to marker for 17:9
4:3 Enables to marker for 4:3
2.35:1 Enables to marker for 2.35:1
2.39:1 Enables to marker for 2.39:1