7
ENGLISH
ENGLISH
3 Remove the screws from the stand and separate the stand from the monitor.
4 Reattach the stand cover.
5 Install the separately purchased the wall mount plate in combination with the monitor.
NOTE
• The wall mount plate is sold separately.
• For more information on installation, refer to the wall mount plate’s installation guide.
• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
CAUTION
• Place the monitor’s screen face down. To protect the screen from scratches, cover the surface with a soft cloth.
1 Remove the stand base by unscrewing it as shown in the illustration below.
or
2 Slide the stand cover down as shown in the illustration below.
To Next Page
Loading...
Need help?
General
