To Next PageTo Next PageWhat to do if my LG 32BQ75C Monitor says "Unrecognized monitor, Plug and Play (VESA DDC) monitor found"?
If you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message on your LG Monitor, be sure to install the display driver from the LG website: http://www.lg.com. Also, make sure to check if the graphics card supports the Plug and Play function.
Why is my LG 32BQ75C screen display unstable and shaky?
If the display on your LG Monitor is unstable or shaky, or if images leave shadow trails, and the resolution is HDMI 1080i 60/50 Hz (interlaced), try changing the resolution to 1080p or the recommended resolution. Also, make sure the graphics card is set to the recommended resolution to avoid blurred text, a dimmed screen, or misalignment.
How to fix no sound from headphone port on LG Monitor?
If there is no sound from the headphone port on your LG Monitor, first ensure that the headphone connections are properly made. Then, try increasing the volume using the joystick. Lastly, set the audio output of your PC to the monitor you are using; note that these settings may vary depending on your operating system.
Why is nothing displayed on my LG 32BQ75C Monitor screen?
There could be several reasons why nothing is displayed on your LG monitor's screen. First, ensure the power cord is correctly plugged into the power outlet and that the power cable connection is secure, then press the power button. Also, verify that the connected input is enabled in the monitor's settings under the Input section. This issue can also occur if the signal cable between your PC and the monitor is either missing or disconnected, so check the cable and reconnect it securely. Finally, the signals transferred from the PC (graphics card) might be out of the monitor's horizontal or vertical frequency range. Refer to the Product Specification section of the manual to set the appropriate frequency.
Why is there no sound from the headphone port on my LG 32BQ75C?
If there is no sound from the headphone port on your LG monitor, first ensure that the headphone port connections are made properly. If the connections are correct, try increasing the volume using the joystick. Also, make sure to set the audio output of the PC to the monitor you are using. Note that the settings may differ depending on the operating system you use.
How to fix LG 32BQ75C when nothing is displayed on the screen?
If nothing is displayed on your LG Monitor screen, first, ensure the power cord is correctly plugged into the power outlet. Next, verify the power cable connection and press the power button. Then, check that the connected input is enabled in the monitor settings (Settings > Input). If the issue persists, inspect the signal cable between your PC and the monitor, ensuring it's properly connected. Lastly, confirm that the signals transferred from your PC (graphics card) are within the horizontal or vertical frequency range supported by the monitor. Refer to the Product Specification section of the manual to set the appropriate frequency.
Why does image sticking occur on my LG Monitor even when it's off?
Displaying a still image for a prolonged time may cause damage to the screen of your LG Monitor, resulting in the retention of the image. To extend the lifetime of the monitor, use a screensaver.
Why does my LG 32BQ75C say "Unrecognized monitor, Plug and Play (VESA DDC) monitor found"?
If you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message on your LG Monitor, install the display driver from the LG website: http://www.lg.com. Additionally, ensure that your graphics card supports the Plug and Play function.
What to do if LG 32BQ75C screen display is unstable and shaky?
If the screen display on your LG Monitor is unstable and shaky, or if images leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution. In addition, not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area, or misalignment of the display. The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
What to do if image sticking occurs on my LG 32BQ75C Monitor?
To prevent image sticking on your LG Monitor, especially if displaying a still image for a long time, use a screensaver to extend the monitor's lifespan.
General| Resolution | 2560 x 1440 (QHD) |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75Hz |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| HDR Support | HDR10 |
| Contrast Ratio | 1000:1 |
| VESA Mount | 100 x 100 mm |
| Response Time | 5ms |
| Connectivity | HDMI, DisplayPort, USB-C |
| USB-C Power Delivery | 90W |
| Viewing Angle | 178º |
| Color Gamut | sRGB 99% |
| Power Consumption | 45W |
| Screen Size | 31.5 inches |
| Brightness | 350 cd/m² |
