To Next PageTo Next PageWhat to do if LG 32BN50U images are displayed without sound?
If images are displayed without sound on your LG Monitor, first ensure that the headphone port connections are properly made. Then, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor you are using; note that these settings may vary depending on your operating system.
Why is nothing displayed on my LG Monitor screen?
If nothing is displayed on your LG Monitor screen, ensure the power cord is correctly plugged into the outlet. Also, verify the power cable connection and press the power button. Check that the connected input is enabled in the settings. If the signal cable is missing or disconnected, check and reconnect it. Finally, if the signals from the PC are out of range, refer to the product specifications in the manual to set the appropriate frequency.
Why is there no sound from the headphone port on my LG 32BN50U Monitor?
If there is no sound from the headphone port on your LG Monitor, first ensure that the headphone port connections are properly made. Then, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor you are using.
Why is my LG Monitor screen display unstable and shaky?
If the screen display of your LG Monitor is unstable and shaky, or images leave shadow trails, and if the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution. Also, not setting the graphics card to the recommended resolution may result in blurred text, a dimmed screen, a truncated display area, or misalignment of the display. The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card.
How to troubleshoot no sound from the headphone port on my LG Monitor?
If there is no sound from the headphone port of your LG Monitor, first ensure that the headphone port connections are made properly. Then, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor you are using. Note that the settings may differ depending on the operating system you use.
How to fix an LG 32BN50U when nothing is displayed on the screen?
If nothing is displayed on your LG Monitor, first ensure the power cord is correctly plugged into the power outlet. Then, check the power cable connection and press the power button. Also, verify that the connected input is enabled in the monitor's settings under the Input menu. If the issue persists, check the signal cable between your PC and the monitor to ensure it's properly connected. Finally, if signals transferred from the PC are out of range, see the Product Specification section of this manual to set the appropriate frequency.
What to do if my LG 32BN50U shows 'Unrecognized monitor, Plug and Play (VESA DDC) monitor found'?
If you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message on your LG Monitor, be sure to install the display driver from the LG website: http://www.lg.com. Also, make sure to check if the graphics card supports Plug and Play function.
Why does image sticking occur on my LG Monitor even when turned off?
If image sticking occurs on your LG Monitor even when it is turned off, it may be because displaying a still image for a prolonged time can cause damage to the screen, resulting in the retention of the image. To extend the lifetime of the monitor, use a screensaver.
How to enable disabled features on LG 32BN50U Monitor?
If some features are disabled on your LG Monitor, disable OSD Lock in General settings.
What to do if my LG Monitor screen display is unstable and shaky?
If your LG Monitor's screen display is unstable and shaky, or if images leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution. Also, ensure that the graphics card is set to the recommended (optimal) resolution to avoid blurred text, a dimmed screen, a truncated display area, or misalignment of the display.
General| Panel Type | IPS |
|---|---|
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| HDR Support | HDR10 |
| AMD FreeSync | Yes |
| sRGB Coverage | 99% |
| Viewing Angle | 178° (H) / 178° (V) |
| Screen Size | 31.5 inches |
| Resolution | 3840 x 2160 |
| Brightness | 350 cd/m² |
| Response Time | 5 ms |
| Connectivity | HDMI |
