42
ENG
ENGLISH
CUSTOMIZING TV SETTING
Basic image options
Setting Description
Backlight
Adjusts the brightness of
the screen by controlling
the LCD backlight. If you
decrease the brightness
level, the screen
becomes darker and the
power consumption will
be reduced without any
video signal loss.
Contrast
Increases or decreases
the gradient of the
video signal. You may
use Contrast when the
bright part of the picture
is saturated.
Brightness
Adjusts the base level of
the signal in the picture.
Sharpness
Adjusts the level of
crispness in the edges
between the light
and dark areas of the
picture. The lower the
level, the softer the
image.
Colour
Adjusts intensity of all
colours.
Tint
Adjusts the balance
between red and green
levels.
Colour
Temperature
Adjusts the overall tone
of the screen as desired.
Set to warm to enhance
hotter colours such as
red, or set to cool to see
less intense colours with
more blue.
Advanced Control
Customizes the
advanced options.
Reset
Restores the options
of each mode to the
factory default.
Advanced image options (Depending on model)
Setting Description
Dynamic
Contrast
Adjusts the contrast to keep it
at the best level according to
the brightness of the screen.
The picture is improved by
making bright parts brighter
and dark parts darker.
Dynamic
Colour
Adjusts screen colours so that
they look livelier, richer and
clearer. This feature enhances
hue, saturation and luminance
so that red, blue and green
white look more vivid.
Noise
Reduction
Reduces screen noise without
compromising video quality.
Gamma
You can adjust brightness of
dark area and middle gray
level area of the picture.
Low: Make the dark and
middle gray level areas
brighter.
Medium: Express the original
picture level.
High: Make the dark and
middle gray level area darker.
Black Level
Sets black level of the screen
to proper level. This function
is available in the following
modes: RF, AV or HDMI.
Low: The reflection of the
screen gets darker.
High: The reflection of the
screen gets brighter.
Motion Eye
Care
Adjusts screen brightness to
prevent eye glare.
Film Mode
Makes video clips recorded in
film look more natural.
This feature operates only in
480i / 576i / 1080i Resolution.
To Next Page
Loading...
