What to do if my LG LED TV has no image and sound?
If your LG LED TV shows no image and produces no sound, first ensure the TV is turned on and that the power cord is securely connected to a functioning wall outlet. Test the outlet with another device to confirm it's working correctly.
Why does my LG 32LB560B turn off suddenly?
If your LG LED TV is turning off suddenly, check the power control settings to ensure the power supply isn't being interrupted. Also, verify if the 'Off Time' or 'Sleep Timer' feature is enabled in the TIME settings. Note that the TV will automatically turn off after 15 minutes of inactivity if there is no signal.
Why is my LG 32LB560B LED TV remote not working?
If you cannot control your LG LED TV with the remote, there might be a simple fix. First, ensure that nothing is covering the receiver on the TV. Also, check for any obstacles between the remote and the TV. If neither of those solves the issue, try replacing the batteries in the remote with fresh ones.
Why does my LG LED TV turn off by itself?
If your LG LED TV turns off suddenly, it might be due to a few reasons. First, examine the power control settings in case the power supply is interrupted. Also, verify if the Off Time or Sleep Timer feature is enabled within the TIME settings. Lastly, the TV automatically shuts down after 15 minutes of inactivity if no signal is detected.
How to fix LG LED TV remote control not working?
If you cannot control your LG LED TV with the remote, check for any obstructions like tape over the receiver and ensure there are no obstacles between the remote and the TV. If these aren't the issue, try replacing the remote's batteries with fresh ones.
What to do if my LG 32LB560B LED TV turns off by itself?
If your LG LED TV is turning off unexpectedly, there are a few things you can check. First, review the power control settings to make sure the power supply isn't being interrupted. Next, verify that the Off Time or Sleep Timer feature isn't activated in the TIME settings. Also, if the TV is left on without a signal, it will automatically turn off after 15 minutes of inactivity.
What to do if LG 32LB560B LED TV remote is not working?
If you're unable to control your LG LED TV with the remote, start by checking if anything, like tape, is covering the receiver. Ensure there are no obstructions between the remote and the TV. If the issue persists, replace the remote's batteries with new ones.
Information on software licenses and open source code.
Guide to unpacking the TV and identifying included accessories.
Identification of TV parts and the function of the joystick button.
Instructions on operating the TV using the joystick button.
Safety guidelines for transporting the television set.
Instructions for setting up the TV, including attaching the stand.
Details on mounting the TV on a table or securing it to a wall.
How to connect an antenna or cable for TV viewing.
Details on connecting external devices via HDMI, USB, and audio ports.
Setting up channels and information on DTV interactivity features.
Adjusting picture settings using Picture Wizard and Picture Mode.
Detailed calibration options for picture quality.
Additional picture settings and energy saving features.
Configuring audio output for TV speakers or external devices.
Synchronizing audio/video and controlling multimedia devices.
Description of SIMPLINK functions and how to set them up.
Configuring closed captions and TV password settings.
Guidelines for using and removing USB storage devices.
List of supported photo, audio, and video file formats.
Information on accessing the online web manual.
Instructions on how to clean the TV screen, frame, and other parts.
List of remote control key codes for external control.
Connecting the TV via USB to Serial converter.
Connecting the TV via RS-232C cable for external control.
Setting up RS-232C communication parameters and Set ID.
Details on communication protocols and a reference list of commands.
Explains transmission protocols and hexadecimal to decimal data mapping.
Commands for power, picture, and sound adjustments.
Commands for tint, sharpness, balance, OSD, lock, ISM, and energy saving.
Commands for tuning channels, including analogue and digital.
Commands for channel management and input source selection.
Commands to control various 3D display modes.
General| Screen Type | led |
|---|---|
| Wall Mount | 200mm x 200mm |
| Screen Size | 31.5 inches, 32 inches |
| Refresh Rate | 60hz |
| Speakers Output | 20 watts |
| Number Of Speakers | 2 |
| USB Ports | 1 |
| Headphones Output | yes |
| Analog Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| DVI | 0 |
| Remote Control | standard |
| 3D | no |
| Power Consumption | 57 kilowatt hours |
| Depth with Stand | 8.25 inches |
| Height with Stand | 18.9 inches |
| Width with Stand | 28.88 inches |
| Net Weight with Stand | 13.7 pounds |
| Depth without Stand | 2.25 inches |
| Height without Stand | 17 inches |
| Net Weight without Stand | 13.2 pounds |
To Next Page
