To Next PageTo Next PageWhat to do if my LG LED TV has no image and sound?
If your LG LED TV shows no image and produces no sound, first ensure the TV is turned on and that the power cord is securely connected to a functioning wall outlet. Test the outlet with another device to confirm it's working correctly.
Why does my LG LED TV turn off suddenly?
If your LG LED TV is turning off suddenly, check the power control settings to ensure the power supply isn't being interrupted. Also, verify if the 'Off Time' or 'Sleep Timer' feature is enabled in the TIME settings. Note that the TV will automatically turn off after 15 minutes of inactivity if there is no signal.
Why is my LG LED TV remote not working?
If you cannot control your LG LED TV with the remote, there might be a simple fix. First, ensure that nothing is covering the receiver on the TV. Also, check for any obstacles between the remote and the TV. If neither of those solves the issue, try replacing the batteries in the remote with fresh ones.
Why does my LG LED TV turn off by itself?
If your LG LED TV turns off suddenly, it might be due to a few reasons. First, examine the power control settings in case the power supply is interrupted. Also, verify if the Off Time or Sleep Timer feature is enabled within the TIME settings. Lastly, the TV automatically shuts down after 15 minutes of inactivity if no signal is detected.
How to fix LG 32LB5600 remote control not working?
If you cannot control your LG LED TV with the remote, check for any obstructions like tape over the receiver and ensure there are no obstacles between the remote and the TV. If these aren't the issue, try replacing the remote's batteries with fresh ones.
What to do if my LG 32LB5600 LED TV turns off by itself?
If your LG LED TV is turning off unexpectedly, there are a few things you can check. First, review the power control settings to make sure the power supply isn't being interrupted. Next, verify that the Off Time or Sleep Timer feature isn't activated in the TIME settings. Also, if the TV is left on without a signal, it will automatically turn off after 15 minutes of inactivity.
What to do if LG 32LB5600 LED TV remote is not working?
If you're unable to control your LG LED TV with the remote, start by checking if anything, like tape, is covering the receiver. Ensure there are no obstructions between the remote and the TV. If the issue persists, replace the remote's batteries with new ones.
General| Screen Type | led |
|---|---|
| Wall Mount | 200mm x 200mm |
| Screen Size | 31.5 inches, 32 inches |
| Refresh Rate | 60hz |
| Speakers Output | 20 watts |
| USB Ports | 1 |
| RF Antenna | yes |
| Headphones Output | yes |
| Digital Optical Audio Outputs | 1 |
| Analog Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| DVI | 0 |
| Remote Control | standard |
| 3D | no |
| Power Consumption | 58 kilowatt hours |
| Depth with Stand | 8.25 inches |
| Height with Stand | 18.9 inches |
| Width with Stand | 28.88 inches |
| Net Weight with Stand | 13.7 pounds |
| Depth without Stand | 2.25 inches |
| Height without Stand | 17 inches |
| Net Weight without Stand | 12 pounds |
LG Electronics provides open source code for licenses like GPL, LGPL, and MPL.
Check product box for included items like remote, manual, stand, and cables.
Identifies TV screen, speakers, power indicator, sensor, and joystick button.
Explains basic functions like power, volume, and channel control using the joystick.
Describes how to navigate menus using the joystick button for settings and input.
Provides safety precautions and methods for safely lifting and moving the TV.
Guides on attaching the stand to the TV set, including cautions.
Instructions for placing the TV upright on a table with proper ventilation space.
Steps for securely mounting the TV to a wall using brackets and cables.
Details on using optional wall mounts, VESA standards, and screw specifications.
How to connect an antenna or cable to watch TV, including RF cable tips.
Guides on connecting external devices like audio systems, Blu-ray players via HDMI and Optical.
Guides on using Auto Tuning to memorize broadcast channels.
Explains the DTVi (Ginga) interactivity feature for digital TV.
Instructions for calibrating picture quality using the Picture Wizard.
Describes various picture modes like Vivid, Standard, Cinema, Game, and Soccer.
Details on advanced picture settings like contrast, color, gamma, and filters.
Explains additional picture settings such as noise reduction and black level.
How to adjust settings to reduce power consumption.
Setting audio output to the TV's internal speakers.
Guides on connecting external speakers via optical port and SIMPLINK.
Configuring digital audio output formats like PCM and Dolby Digital.
Connecting LG audio devices using optical output for enhanced sound.
Synchronizing audio and video output for better viewing experience.
Controls and manages multimedia devices with the TV remote via SIMPLINK menu.
Instructions for setting or changing the TV password for security.
Enabling and configuring caption settings for broadcast programs.
Resets the TV to its default factory settings, deleting all custom setups.
Safely ejecting USB storage devices from the TV.
Important warnings and recommendations for using USB storage devices.
Lists supported file formats for photos, audio, and subtitles.
Details supported photo file types and size limitations.
Lists supported audio file types, bit rates, and sample frequencies.
Lists supported video file formats, codecs, and maximum resolutions.
Lists resolutions and frequencies supported via HDMI for PC input.
Lists resolutions and frequencies supported via HDMI for DTV input.
Information on connecting component video and audio ports.
Provides guidelines and cautions for cleaning the TV screen and body.
Information on setting up external control devices, directing users to lg.com.
Lists hexadecimal codes for various remote control functions.
Explains connecting a USB to Serial converter for external control.
Details on using RS-232C cables for legacy connections, including pin configurations.
Information on RS-232C cable configurations and set ID settings.
Provides diagrams for 3-wire and D-Sub configurations for RS-232C connection.
Lists parameters like baud rate, data length, parity, and stop bit for communication.
A comprehensive list of commands, their codes, and hexadecimal data for controlling the TV.
Defines the format for sending commands and receiving acknowledgements.
Explains the format of successful acknowledgement signals from the TV.
Describes the format for error signals or illegal codes received by the TV.
Provides conversion tables for hexadecimal data used in commands.
Details commands for tuning analogue channels, including input sources.
Commands for tuning digital channels, including physical, major, minor numbers.
Command to skip or add channels for future viewing.
Command to send specific IR remote key codes for TV control.
Commands to change 3D modes, options, and effects on compatible models.
Commands for advanced 3D options like picture correction and sound zooming.
