77
WATCHING TV / CHANNEL CONTROL
SIMPLINK Functions
Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media
without additional settings.
Select AV device: Enables you to select one of the AV devices connected to the TV.
Disc playback: Control connected AV devices by pressing the
, ENTER, , , , and but-
tons.
Power off all devices: When you power off the TV, all connected devices are turned off.
Switch audio-out: Offers an easy way to switch audio-out.
Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play,
The TV will automatically turn on.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC:
Consumer Electronics Control).
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does
not provide this function)
NOTE
► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of
the SIMPLINK device with the HDMI cable
►
When you switch the Input source with the INPUT button on the remote control, the SIMPLINK
device will stop.
► When you select a device with home theater functionality, the sound output automatically switches
to the home theater speakers and the TV speakers are turned off.
►
If a connected SIMPLINK home theater system doesn’t play the audio from the TV, connect the
DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the
back of the SIMPLINK device with an OPTICAL cable.
To Next Page
Loading...
Need help?
General
