90
EPG (ELECTRONIC PROGRAMME GUIDE)
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Record/Remind Setting Mode
Sets a start or end time for recording, and sets only a start time for the reminder with the end time
grayed out.
This function is available only when recording equipment that use pin8 recording signalling has been
connected to the TV-OUT(AV1) terminal, using a SCART cable.
Recording function is only supported in the Digital mode and not in the Analogue mode.
Switch off Manual Timer mode.
Select Remind or Record function setting.
Select Type, Start Time, End time or
Programme.
YELLOW
Change to Guide mode.
BLUE
Change to Schedule List mode.
Save Timer Record/Remind.
Manual Timer
ExitMove
Programme Guide Schedule List
OK
Wed. 12 Aug. 2009 13:46
Select the date to schedule.
Sun.
09 10 11
Mon. Tue. Wed. Thu. Fri. Sat.
12 13 14 15
22
29
05
21
28
04
20
27
03
19
26
02
18
25
01
17
24
31
16
23
30
Wed. 12 Aug. 2009
No schedule list
OK
Prev.
Select a schedule type
▼
▲
Start TimeType
17 : 30
DTV 801 ANTV D...
End Time Programme
15 : 09Record
Close
To Next Page
Loading...
