LG 32LN549C - Logo Image Download

10
ENG
ENGLISH
INSTALLATION MENU
Logo Image Download
Make a ‘LG_DTV’ folder on the USB flash drive
and then copy the splash image file to that folder.
1
Connect the USB device to the USB IN jack on
the TV.
IN 3
H/P USB IN
AV IN 2
VIDEO
AUDIO
L/MONO
R
ANTENNA/
CABLE IN
RGB IN (PC)
AUDIO IN
(RGB/DVI)
RS-232C IN
(CONTROL &
SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
AUDIO
L/MONO
R
VIDEO
AUDIO
COMPONENT IN
AV IN 1
Y PB PR
L R
1
2
/DVI IN
IN 3
H/P USB IN
AV IN 2
VIDEO
AUDIO
L/MONO
R
ANTENNA/
CABLE IN
RGB IN (PC)
AUDIO IN
(RGB/DVI)
RS-232C IN
(CONTROL &
SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
AUDIO
L/MONO
R
VIDEO
AUDIO
COMPONENT IN
AV IN 1
Y PB PR
L R
1
2
/DVI IN
2
Use the v or ^ button to select the
USB
Cloning
option and then press the
OK
button.
Installation Menu (V 2.6)
Public Display Settings
USB Cloning
Password Change
Set ID Setup
Configuration Setup
External Speaker
OK
3
Use the v or ^ button to select Logo Image
Download and press the
OK
button.
USB Cloning
Receive from USB
Send to USB
Logo Image Download
OK
Previous
ꕣ
4
Use the v or ^ button to select the desired file
name and press the
OK
button.
Logo Image Download
Image1.jpg
Image2.jpg
Image3.jpg
OKPrevious
ꕣ
5
Wait till the download process is completed.
After completion of download, TV set will
restart automaticallly.
!
?
!
?
TV Software Upgrade
UPGRADING...
100%
Do not unplug!
6
You can see a new Splash Image on TV which
you downloaded while turning on TV.
INPUT
MENU
VOL CH ENTER
NOTE

Splash Image update function supports only
JPEG format file of less than 1 MB filesize.

JPEG images with progressive encoding are
not supported.

We recommend you that splash image
resolution match the TV`s panel resolution.

Max resolution of splash image: Full HD ->
1920 x 1080, HD -> 1360 x 768.

The TV will keep the Splash image until you
change it.