LG 32LN549C - USB Cloning

9
ENG
ENGLISH
INSTALLATION MENU
USB Cloning
An Installer can quickly set up and clone multiple
TV sets at a property. These cloned TVs will all
have the same Master TV Setup: Public Display
Mode Installation Menu settings, User A/V settings
and the Channel Map. This newer procedure
significantly decreases the installation time.
Receive from USB
* USB Restriction: NTFS format is not supported.
1
Plug USB memory card into the USB port of the TV.
2
Use the v or
^
button to select the
USB
Cloning
option and then press the
OK
button.
Installation Menu (V 2.6)
Public Display Settings
USB Cloning
Password Change
Set ID Setup
Configuration Setup
OK
3
Use the v or
^
button to select the
Receive
from USB
and press the
OK
button.
• Below explains the naming rules for .TTL files
The supported model line will be in the name
of the file but the screen size will be listed as
"xx".
This allows TVs having the same chassis
model number to use the same ‘*.TTL’ file
without regard to the screen size.
ex) The name of ‘*.TTL’ file is ‘xxLH200C-
UA00000.TLL’ for 32/37/42LH200C model.
USB Cloning
Receive from USB
Send to USB
Logo Image Download
OK
Previous
ꕣ
4
Use the v or
^
button to select the desired
*.TLL
files name and press the
OK
button.
Receive from USB
xxLH200C-UA00001.TLL
xxLH200C-UA00002.TLL
xxLH200C-UA00003.TLL
OKPrevious
ꕣ
5
The TV is changed to Standby mode after a
successful download.
If the download failed, the TV will changed to
the initial installation screen.
Send to USB
* USB Restriction: NTFS format is not supported.
1
Plug the USB memory card into the USB port
of the TV.
2
Use the v or
^
button to select the
USB
Cloning
option and then press the
OK
button.
Installation Menu (V 2.6)
Public Display Settings
USB Cloning
Password Change
Set ID Setup
Configuration Setup
OK
3
Use the v or
^
button to select the
Send to
USB
and press the
OK
button.
USB Cloning
Receive from USB
Send to USB
Logo Image Download
OK
Previous
ꕣ
4
Use the v or
^
button to select the desired file
mane and press the
OK
button.
Send To USB
Select the file name and press OK to start
ꔠ
ꔡ
xxLH200C-UA00001.TLL
OK
Previous
ꕣ
5
The TV is changed to the initial installation
screen after a successful download.