LG 32LN549C - Configuration Setup

11
ENG
ENGLISH
INSTALLATION MENU
Changing the Password
If security for the system is a critical issue, the
password can be changed.
1
Use the v or ^ button to select the
Password
Change
option and then press the
OK
button.

If the password is incorrect, the TV will
return to the installation menu (This feature
is not available for all models).
2
Key in a new four number password, key in the
password again for confirmation.

The password cannot be “8-7-4-1”. That
sequence of numbers is used to enter the
calibration menu (This feature is not available
for all models).
Password Change
New Password
Confirm Password
OK
*
*
* *
* * **
Previous
ꕣ
Set ID Setup
1
Use the v or ^ button to select the
Set ID
Setup
option and then press the
OK
button.
2
Select
Yes
to enable
Set ID Lock
or
No
to
disable
Set ID Lock
.
3
Key in a set ID number 1 ~ 99.
Set ID Setup
Set ID Lock
Set ID
OK
◀
Yes
▶
1
Previous
ꕣ
Configuration setup
1
Select RCU (Remote Control Unit)

It is a mode to set whether to use Select
RCU or not. When ‘Select RCU’ is set to
‘Enable’, You can adjust the ‘Number of
RCU’ menu.
2
Number of RCU

It is a mode to set the Number of RCU.
Number of RCU value range 1 ~ 9 (When
‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0 (When ‘Select
RCU’ is set to ‘Disable’)
* RCU (Remote Control Unit): It is special RCU
that operates only a set number of RCU in the
TV.
3
Splash Offset Time

Sets the splash image display time.

The time can be set to between 0 and 10
seconds.
4
USB Auto playback

When 'USB Auto Playback' is 'Enable', TV
finds and plays USB's movie files located
at the first slot and partition and root(top)
directory movies if USB is pluggedin. (Some
menu OSDs may prevent this function.)

When the TV is on, the TV will search
the USB's movie files and play them,
automatically.

If it reaches the last file, it starts the first file
again.
5
Auto Sensing (For LP360H Only)

Select ‘Aux Source Setting – Yes’ to use
‘Auto Sensing’ function (See page 7). If 'Auto
Sensing' is set to 'To Set
⊙
', the input is
automatically switched when the input signal
that you set to 'ON' is received .

If 'Auto Sensing' is set to 'Disable', the input
is not switched when the input signal is
received .

TV can display the switched input depends
on connected device’s display availability.

SIMPLINK and Auto Sensing cannot work
simultaneously. If SIMPLINK is set to On,
Auto Sensing is automatically set to Disable.

If the signal is removed while Auto Sensing
(automatic input switch) is enabled, the input
returns to the previous setting .

If the several inputs are connected by
enabling Auto Sensing and the automatic
input switch is performed several times, the
input returns to the previous setting only
for the last input and does not repeat the
operation for the rest.
Configuration Setup
Select RCU
Number of RCU
Splash Offset Time
USB Auto Playback
Auto Sensing
Enable
1
0
OK
Previous
ꕣ
Disable
Disable