GG
To enjoy vivid picture and sound,connect a PC to
the set.
GG
Avoid keeping a fixed image on the set ’s screen
for a long period of time.The fixed image may
become permanently imprinted on the
screen;use a screen saver when possible.
GG
Connect PC to the RGB (PC) port of the
set;change the resolution output of PC accord-
ingly.
GG
There might be noise according to some resolu-
tion,vertical pattern,contrast or brightness in PC
mode.Change the PC mode into another resolu-
tion or change the refresh rate into another rate
or adjust the brightness and contrast on the
menu until the picture is clean.If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult it to the
manufacturer of the PC graphic card.
GG
The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
GG
We recommend using 852x480, 60Hz for the
PC mode, they provide the best picture quality.
GG
If the resolution of PC is over XGA, there will be
no picture on the set.
GG
Connect the audio cable from the PC to the
Audio input on the set.(Audio cables are not
included with the set).
GG
When you use too long RGB-PC cable,there
might be a noise on the screen.We recommend
using under 5m of the cable.It provides the best
picture quality.
GG
The set dose not support DVI-PC mode.
NOTE
To Next Page
Loading...
