Picture
NOTE
• The [Picture Mode] that can be set depends on the Input signal.
[[Picture Mode] on SDR (Non HDR) signal]
[Settings] > [Picture] Description
[Picture Mode] [Custom] Allows the user to adjust each element.
[Vivid] Heightens contrast, brightness and sharpness to display vivid images.
[HDR Effect] Optimizes the screen for high dynamic range.
[Reader] Optimizes the screen for reading documents. You can brighten the screen in the OSD menu.
[Cinema] Optimizes the screen to improve the visual effects of a video.
[sRGB] A standard RGB color space for the monitor and printer.
[DCI-P3] Suitable for watching digital videos.
[FPS] This mode is optimized for FPS games.
[RTS] This mode is optimized for RTS Game.
[EBU] A standard TV PAL color space for broadcasting.
[REC709] A standard HDTV color space for broadcasting.
[SMPTE-C] A standard TV NTSC color space for broadcasting.
[Color Weakness] This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors.
[Calibration 1] Adjusts to the last calibrated screen.
[Calibration 2] Adjusts to the previously calibrated screen.
NOTE
• If the [Picture Mode] is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your PC screen may be affected.
• [Calibration 2] : Installation of TRUE COLOR PRO will enable this menu.
To Next Page
Loading...
