Settings > General Description
DisplayPort 1.2
Enables or disables DisplayPort 1.2.
NOTE
• Be sure to configure this option according to the DisplayPort version supported by your graphic card. Set this option to Disable if your graphic card does not support DisplayPort 1.2.
Buzzer This feature lets you set the sound generated from Buzzer when your monitor powers on.
OSD Lock This feature disables the configuration and adjustment of menus.
Deep Sleep Mode
When Deep sleep mode is enabled, power consumption is minimized while the monitor is in standby mode.
On
Enables Deep sleep Mode.
Off
Disables Deep sleep Mode.
NOTE
• USB Charging and HuB functions will not work in standby mode while Deep sleep Mode is enabled in standby mode.
USB Upstream
Select the USB Upstream cable connection port to use the USB Hub of the monitor.
USB-B USB Upstream operates via USB UP port.
USB-C USB Upstream operates via USB-C port.
Information
The following display information will be shown; Model, Serial Number, Total Power On Time, Resolution.
Reset
Do you want to reset your settings?
No Cancel the reset.
Yes Restores the default settings.
To Next Page
Loading...
