ENGENGLISH
15
ASSEMBLING AND PREPARING
1
2
Setting Up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
y
When attaching the stand to the TV set, place the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
y
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
y
Do not tighten the screws with too much force; otherwise they may be damaged and come
loose later.
CAUTION
y
Remove the stand before installing the TV on a wall mount by performing the stand attachment
in reverse.
NOTE
(For 42/47/50/55/60LB6500,
39/42/47/50/55/60LB650T)
(For 65LB650T, LB700T series, 70LB720T)
Stand Base
Stand Base/
Stand Body
B stand base
A stand base
1
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2
Attach the stand to the TV using the lower
connection on the back of the TV.
1
2
To Next Page
Loading...
Need help?
General
