P201 Power Supply Connector Voltage and Diode Check
P201 Connector
P201 Connector "SMPS Board" To P502 "MAIN Board"
Pin Label STBY Run Diode Check
24 ERROR n/c n/c 2.03V
23 n/c n/c n/c n/c
22 PWM 0V 0.2V~3.3V OL
Odd pins
are on top
row
.
20 n/c n/c n/c n/c
19 12V 0V 12V 0.48V
18 DRV-ON 0V 3.26V OL
1
.
16 V-SYNC n/c n/c n/c
13-15 Gnd Gnd Gnd Gnd
9-12 3.5V 3.55V 3.53V 2.63V
(1) PDIM1 Pin 22 can vary according to incoming video IRE
level, OSD Backli
ht settin
and then Intelli
ent Sensor
-
n
n
n
n
2-4 24V 0V 24.5V 1.09V
1PWR-ON0V 2.62V 1.15V
(room light condition) Output from the Video Processor
IC900. Range 0.37V to 3.3V.
.
P-DIM1
May 2011 LCD TV 42LV5500
53
Diode Mode values taken with all Connectors Removed
.