Accessing the Front IR
The Front IR is under a wire routing bracket.
Remove the one Screw and disconnect the connector.
Attached to the Front Frame
For access to the board for voltage checks,
Slide the wire routing bracket to the right to allow the
bracket to pull forward.
emove
e ca
e w
re
rom
e w
re rou
ng
bracket and reconnect the connector.
Tab
Slide
Right
LEDs
Infrared
Receiver
IC2
Light Guide
for Power
LEDs
Key Board
Decoder
V
G
O
Ground
Output: 1.54V
May 2011 LCD TV 42LV5500
79
.