LG 49LS73D - Studio Mode] S N; LAN Daisy Chain] S N; Content Rotation] S N; DPM Wake up Control] S N, 0 B 00 to

ENGLISH_index
59
70. [Studio Mode] (Command: s n, 83)
Sets Studio Mode to on/off.
Transmission
(s)(n)( )(Set ID)( )(8)(3)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(8)(3)(Data)(x)
* This feature may not be supported in certain models.
71. [LAN Daisy Chain] (Command: s n, 84)
Sets LAN Daisy Chain to on/off.
Transmission
(s)(n)( )(Set ID)( )(8)(4)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(8)(4)(Data)(x)
* This feature may not be supported in certain models.
72. [Content Rotation] (Command: s n, 85)
Sets Content Rotation to on/off.
Transmission
(s)(n)( )(Set ID)( )(8)(5)( )(Data)(Cr)
Data 00: Off
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(8)(5)(Data)(x)
* This feature may not be supported in certain models.
73. [DPM Wake up Control] (Command: s n, 0b)
Sets the DPM Wake up Control Mode.
Transmission
(s)(n)( )(Set ID)( )(0)(b)( )(Data)(Cr)
Data 00: Clock
01: Clock+DATA
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(0)(b)(Data)(x)
* This feature may not be supported in certain models.
74. [Scan Inversion] (Command: s n, 87)
Sets Scan Inversion to on/off.
Transmission
(s)(n)( )(Set ID)( )(8)(7)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(8)(7)(Data)(x)
* This feature may not be supported in certain models.
75. [Beacon] (Command: s n, 88)
Sets Beacon to on/off.
Transmission
(s)(n)( )(Set ID)( )(8)(8)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(8)(8)(Data)(x)
* This feature may not be supported in certain models.