What to do if there is no sound output from LG 49VL5PJ-A.AAU Digital Signage?
If there is no sound output from your LG Digital Signage: * See if the audio cable is connected properly. * Adjust the volume of the product or external device. * See if the sound is set properly.
Why is my LG 49VL5PJ-A.AAU screen brightness dark?
If the screen of your LG Digital Signage appears dark, try these solutions: First, adjust the brightness and contrast settings. If the issue persists, the backlight may need repair. Also, if the internal temperature of the enclosure rises, clean the heat exchanger or filter periodically.
How to fix stripes appearing in the background of LG Digital Signage?
To address stripes appearing in the background of your LG Digital Signage, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
How to troubleshoot no sound output on LG 49VL5PJ-A.AAU Digital Signage?
If there is no sound coming from your LG Digital Signage, check the following: Ensure the audio cable is properly connected. Adjust the volume on both the product and any external devices. Verify that the sound settings are correctly configured.
What to do if LG 49VL5PJ-A.AAU shows ‘No signal’ or ‘Invalid Format’?
If you see a ‘No signal’ or ‘Invalid Format’ message on your LG Digital Signage, try the following: Check the signal cable to ensure it is properly connected. Access the input menu to verify the input signal source. Adjust the frequency range according to the specifications in the manual.
How to correct the position of the screen on LG 49VL5PJ-A.AAU Digital Signage?
To correct the screen position on your LG Digital Signage: * Check if the graphics card resolution and frequency are supported by the product. If the frequency exceeds the supported range, use PC settings to set the resolution to the recommended value. * Press the button on the remote control to automatically select the optimal screen status. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
How to fix LG Digital Signage showing ‘No signal’ or ‘Invalid Format’ message?
If your LG Digital Signage displays a ‘No signal’ or ‘Invalid Format’ message, try these steps: * Check the signal cable. * Access the input menu to verify the input signal. * Adjust the frequency range by referring to the specifications in this manual.
What to do if the power suddenly turned off on LG Digital Signage?
If your LG Digital Signage suddenly turns off, check these potential causes: * Verify if the auto-off function is activated in the time-related settings. * Ensure the product power cord is properly connected, as the power source may not be supplied correctly. * Check the power control settings. * If the internal temperature of the enclosure rises, the power may shut down; clean the heat exchanger or filter periodically. * Check if the fan is working properly.
Why is my LG 49VL5PJ-A.AAU screen displayed abnormally?
If your LG Digital Signage screen is displaying abnormally, try the following: * Connect the signal cable that matches the source input signal. * If condensation appears on the screen, allow some time after powering on for it to disappear. * When connecting the panel and the Signage box, check that their serial numbers match. If they do, unplug the power cord and plug it in again to run the Clear Panel Noise feature. You can also run this feature in (Settings) [Display] [Advanced Settings] [OLED Panel Settings] [Clear Panel Noise] menu.
What to do if touch does not respond on LG Digital Signage?
If the touch function isn't responding on your LG Digital Signage, consider the following: * Ensure the USB cable between the PC and the product is connected; if not, remove and reconnect it after 10 seconds. * Verify that your PC's power cord is firmly plugged into a grounded outlet and restart your PC. * If the system is down due to an unstable network, reconnect the LAN cable or restart your PC. * Check the signal cable connection between your PC and the product. * Ensure the product is powered on. * Always connect the power cord to a grounded outlet to prevent breaks or touch errors. * Check if the screen is currently on.
General| Screen Size | 49 inches |
|---|---|
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Operating Temperature | 0°C to 40°C |
| Dynamic Contrast Ratio | 500, 000:1 |
| Viewing Angle (H x V) | 178° x 178° |
| Life Time | 50, 000 hours |
| Operation Hours | 24/7 |
| Power Supply | 100-240V~, 50/60Hz |
| Display Type | LCD |
| Storage Temperature | -20°C to 60°C |
| Standby Power Consumption | 0.5W |
| Resolution | 1920 x 1080 (FHD) |
| Connectivity | HDMI, DVI-D, DP, Audio, USB, RS232C, RJ45 |
| Response Time | 8 ms (GtG) |
| Orientation | Landscape & Portrait |
| Output | Audio |
| Brightness | 500 cd/m² |
To Next Page
