Why does my LG Plasma TV turn off suddenly?
If your LG Plasma TV suddenly turns off, first examine the power control settings to ensure the power supply isn't interrupted. Then, verify if the Auto sleep feature is enabled within the Time settings. Also, be aware that the TV will automatically shut down after 15 minutes of inactivity if no signal is detected while it's on.
How to calibrate touch pen on LG Plasma TV?
If the touch pen is touched on wrong positions on your LG Plasma TV, first, set the computer screen to display only on the TV. If you're using a PC signal (RGB) cable and the touch point on the TV screen doesn't match the point indicated on the computer screen, use the TV remote to navigate to [SETTINGS] ? [Picture] ? [Screen] (RGB-PC), then select [Auto Config.] to adjust the screen.
How to fix LG 50PA4500-UF Plasma TV remote control not working?
If you cannot control your LG Plasma TV with the remote, start by checking the remote control sensor on the TV and try again. Ensure there are no obstacles blocking the path between the remote and the TV. Finally, verify that the batteries in the remote are working correctly and are properly installed, paying attention to the correct polarity (+ to -, + to -).
How to fix abnormal screen when using Pentouch on LG 50PA4500-UF?
If the TV screen doesn’t look normal when using Pentouch with your LG Plasma TV, first verify that the computer is correctly connected to the TV. Then, check that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
Why does the image appear slowly when my LG 50PA4500-UF Plasma TV turns on?
When you turn on your LG Plasma TV, the image may appear slowly because the image is muted during the product startup process, which is normal. However, if the image doesn't appear after a few minutes, unplug the TV for 30 seconds and then try again. If the image still does not appear, no answer.
How to fix LG 50PA4500-UF Plasma TV screen when using Pentouch?
To address a non-normal screen appearance when using Pentouch on your LG Plasma TV, first, verify that the computer is properly connected to the TV. Next, ensure that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
Why my LG 50PA4500-UF has no image and sound?
If your LG Plasma TV shows no image and produces no sound, first ensure that the TV is turned on. Then, check whether the power cord is properly connected to the wall outlet. Finally, test the wall outlet by connecting other products to see if there's a problem with the outlet itself.
What to do if my LG Plasma TV turns off suddenly?
If your LG Plasma TV turns off suddenly, it might be due to an interruption in the power supply. Check the power control settings. Also, the Auto sleep feature in the Time settings might be activated. If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
Why does my LG 50PA4500-UF Plasma TV keep turning off?
If your LG Plasma TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, see if the Auto sleep feature is activated in the Time settings. If there's no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
What to do if my LG Plasma TV has no image and sound?
If your LG Plasma TV shows no image and produces no sound, first ensure that the TV is powered on. Next, check that the power cord is securely connected to a functioning wall outlet. To confirm the outlet's functionality, try plugging in other devices.
General| Screen Size | 50 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1024 x 768 |
| Aspect Ratio | 16:9 |
| Response Time | 0.001 ms |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 600 Hz |
| Viewing Angle | 178 degrees |
| Sound Output | 10W x 2 |
| Inputs | HDMI, Component, Composite, RF, USB |
To Next Page
