How to correct the display offset on my LG 50PA4500?
To correct the display offset on your LG Plasma TV, first, adjust the position setting in the PICTURE menu. Second, check if the video card resolution and frequency are supported by the TV. If the frequency is out of range, set the recommended resolution using the display settings on the external device.
Why does my LG Plasma TV keep turning off by itself?
If your LG Plasma TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, check if the Auto sleep feature is activated in the Time settings. If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
Why is my LG Plasma TV remote not working?
If you cannot control your LG Plasma TV with the remote, first, check the remote control sensor on the TV and try again. Second, make sure there are no obstacles blocking the path between the remote and the TV. Finally, check that the batteries in the remote are working and properly installed.
How to fix no sound on LG Plasma TV but picture is fine?
If you see images on your LG Plasma TV but hear no sound, try the following: First, press the volume + or - button. Second, check if the sound is muted by pressing the MUTE button. Third, try switching to other channels to rule out a broadcast issue. Lastly, verify that the audio cables are correctly connected.
How to fix 'No Signal' on my LG 50PA4500 Plasma TV?
If you see a “No Signal” message on your LG Plasma TV screen, first, check if the signal cable is correctly connected between the TV and your other devices. Then, press the INPUT button to check and select the correct input source.
Why is my LG Plasma TV showing black and white, or poor color?
If your LG Plasma TV displays images in black and white or with poor color quality, first, adjust the color setting in the PICTURE menu. Second, ensure there's sufficient distance between the TV and other electronic devices. Finally, try switching to other channels to rule out a broadcast issue.
What to do if the touch pen doesn't work with my LG Plasma TV?
If the touch pen is not working with your LG Plasma TV, first, check that you used the remote control to enter Pentouch mode. Second, check that the Pentouch dongle is connected to the computer and the red LED is on. Third, press the button on the touch pen to check that it is powered on. Fourth, check that the touch pen is paired for use. (The touch pen is correctly paired if the red LED is on once when you press the Touch Home button on the touch pen.) Finally, set the computer screen to display only on the TV.
How to get rid of thin lines in the background of my LG Plasma TV screen?
If you see thin lines in the background of your LG Plasma TV screen, check the video cable connections.
How to prevent afterimages (ghosts) on my LG 50PA4500 Plasma TV?
Afterimages (ghosts) appear when the product turns off because pixels may have been damaged from a fixed image displayed for a long time (image burn). Use a screen saver to prevent pixel damage on the screen.
How to fix lines or streaks on LG 50PA4500 Plasma TV screen?
If lines or streaks appear on the images of your LG Plasma TV, check the antenna and make sure to aim it in the proper direction.
General| 3D | No |
|---|---|
| Depth | 53.34 mm |
| Width | 1168 mm |
| Height | 703.6 mm |
| Weight | 25830 g |
| HD type | Not supported |
| 24p support | Yes |
| Pixel pitch | - mm |
| Smart modes | Cinema, Game, Standard, Vivid |
| Aspect ratio | 4:3 |
| HDMI version | 1.3 |
| Package depth | 229.6 mm |
| Package width | 1331 mm |
| Product color | Black |
| Package height | 817.9 mm |
| Package weight | 33790 g |
| RMS rated power | 10 W |
| AC input voltage | 100 - 240 V |
| Display diagonal | 50 \ |
| AC input frequency | 50 - 60 Hz |
| Depth (with stand) | 297.2 mm |
| Display brightness | - cd/m² |
| Display resolution | 1024 x 768 pixels |
| Display technology | Plasma |
| Number of speakers | 2 |
| Height (with stand) | 756.9 mm |
| Placement supported | Horizontal |
| Weight (with stand) | 28210 g |
| Supported video modes | 1080i, 1080p, 720p |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | AAC, HE-AAC, LPCM, MP2, MP3, MS-ADPCM, WMA |
| Image formats supported | JPG |
| Number of OSD languages | 4 |
| S-Video inputs quantity | 0 |
| Video formats supported | DIVX |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | - |
| Equalizer bands quantity | 5 |
| Panel mounting interface | 400 x 400 mm |
| Annual energy consumption | 189.8 kWh |
| Display diagonal (metric) | 126.7 cm |
| Screen format adjustments | 4:3, 16:9 |
| Analog signal format system | NTSC |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 130 W |
| Sustainability certificates | ENERGY STAR |
| Digital signal format system | ATSC |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| On Screen Display (OSD) languages | ENG, ESP, FRE, KOR |
| Consumer Electronics Control (CEC) | Anynet+ |
To Next Page
