ENGLISH
9
[LG ConnectedCare (Signage 365 Care)]
[Ez Setting] [LG ConnectedCare (Signage 365 Care)]
You can install the LG ConnectedCare (fault diagnosis) solution for fault diagnosis and prediction service.
• [Install]: Installs the LG ConnectedCare solution.
1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the LG ConnectedCare solution.
- Account Number: The number assigned when the LG ConnectedCare solution is registered. When the account
number is entered, the account name corresponding to the number is obtained.
2) [CONFIRM ACCOUNT NUMBER]: Displays the account number and the account name corresponding to the
account number and validates the account number.
- If the account number is registered, the account name corresponding to the account number is displayed, and you
can continue to install the LG ConnectedCare solution.
- If the account number is not registered, “Unknown” is displayed as the account name, and you cannot continue to
install the solution.
• [Enable]/[Disable]: Sets whether to Enable/Disable the LG ConnectedCare solution.
• [Account]: Displays user’s currently connected account number and name.
• [Version]: Displays the version of the LG ConnectedCare solution.
• [Check for Update]: Checks for available updates in the server.
• [Update]: Updates the LG ConnectedCare solution to the latest version.
• [Server Status]: Displays the status of connection between the set and server.
- [Connected]: Displayed when the set and server are connected.
- [Not Connected]: Displayed when the set and server are disconnected.
- [Waiting for Approval]: Displayed when the server is waiting for approval.
- [Rejected]: Displayed when the server rejected the connection.
• [Reset]: Deletes the installed LG ConnectedCare solution.
To Next Page
Loading...
